Our solution

TBM

Moving

TBM

The full-face machine is designed for high groundwater table and pressure up to 3 bar in ground conditions starting from 0 to 250mpa. This type of machine is laser guided with electronically controlled pressure sensors for cutting head and advance press. We can build machines from 800mm up to 3500mm outer diameter, either being controlled remotely via a control container or optional from the inside with a control panel starting at 2000 mm outer diameter. Choices for the configuration are slurry circuit or screw conveyor.

The maximum length of a single drive is depending on the size of the machine amongst other things, but in general it can go up to 1000 m.

For more information kindly contact us with your project details to draft the machine accordingly.

Roadheader

The roadheader is a machine suitable for mixed ground conditions without groundwater starting from 0 to 60mpa. This machine has very good access to the face and is easy to control and operate. Available size range: 1800mm to 3000mm outer diameter.

For more information kindly contact us with your project details to draft the machine accordingly.

Excavator

The excavator is for soft and clay ground without groundwater. This machine also has very good access to the face, is easy to control and operate. Available size range: 1800mm to 3600mm outer diameter.

For more information kindly contact us with your project details to draft the machine accordingly.

Subways

Tunnelling machines can be used for several kinds of tunnels such as e.g. pedestrian subways, no matter if round or square shaped. Both serve the purpose of safely crossing underground streets and rails all over the world.

Also for your tunnel, we can build the proper machine and we would like to show you some leads, which could be interesting for your tunnel too.